Aren't they adorable? What do you guys think?
Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts
DIY: Paper pomander- flower balls
Check out this great DIY project I found on Hostess with the Mostess! These paper pomander-flower balls would be great as table centerpieces for any event! They're really easy to make, go ahead and give them a whirl!
Aren't they adorable? What do you guys think?
Aren't they adorable? What do you guys think?
DIY Favors: Paper Cake Slice
We saw this posted on the How About Orange blog and loved this idea as a DIY project for wedding favors. The paper cake slice is so adorable and perfect to fill with whatever candy or favor you want! It is a great unique detail to add to any wedding. You can even use different color paper to make different "flavored" cakes!
Find the simple instructions at Paper Source Blog.
Guest Blogger! With this Ring - DIY
I am loving all of Darci's DIY projects! I cannot thank her enough for these posts! It really makes you realize these are do'able! So, without further ado, here is Darci's DIY Envelope Liners!!
Seeing as how I am a glutton for punishment, I decided to make my own envelope liners for our wedding. It sounds like a daunting task at first but I can assure you that if you give yourself enough time, it can be worth it to have envelopes lined in the paper you have year heart set on (which is why I started this project to begin with)!
It's sometimes easier to pull the envelope apart, but I tried to conserve so I measured one that was still in tact. I used a regular manila envelope to create a template, and started by cutting it so that it was 1/8 of an inch shorter than the envelope on each side:
For the top portion, I cut the manila envelope so that it was about 1/4 of an inch from the top point of the envelope. Then I put the entire square into the envelope itself:
Then I put a ruler at the top of the point and made a (clearly not so straight) line onto the template so that I had a mark for the upper most point:
Then take a ruler and make a line from the crease of the envelope to the mark you just made for the upper most center point:
Make those lines on either side and then cut off the corners...and there's your template! Honestly, making the template perfect took me the longest. From here on out is pretty straightforward.
Just put the template on your paper of choice and trace away. If you use a corner of the paper you only have to make three quick lines:
Cut the liner out along the lines you just made:
And insert into the envelope!
Now you just need to get a nice crease so that it all folds together nicely. So I just folded the envelope flap down and used a boning folder along the edge to make a crease:
Now you just take a tape roller (these things save a ton of time) and put tape on each of the edges:
Press it into the envelope flap, and viola! Once the template is finished it takes just a few minutes to make the actual liner. I traced a bunch of them at once, and then cut about 25 of them in under a half an hour.
Seeing as how I am a glutton for punishment, I decided to make my own envelope liners for our wedding. It sounds like a daunting task at first but I can assure you that if you give yourself enough time, it can be worth it to have envelopes lined in the paper you have year heart set on (which is why I started this project to begin with)!
It's sometimes easier to pull the envelope apart, but I tried to conserve so I measured one that was still in tact. I used a regular manila envelope to create a template, and started by cutting it so that it was 1/8 of an inch shorter than the envelope on each side:
For the top portion, I cut the manila envelope so that it was about 1/4 of an inch from the top point of the envelope. Then I put the entire square into the envelope itself:
Then I put a ruler at the top of the point and made a (clearly not so straight) line onto the template so that I had a mark for the upper most point:
Then take a ruler and make a line from the crease of the envelope to the mark you just made for the upper most center point:
Make those lines on either side and then cut off the corners...and there's your template! Honestly, making the template perfect took me the longest. From here on out is pretty straightforward.
Just put the template on your paper of choice and trace away. If you use a corner of the paper you only have to make three quick lines:
Cut the liner out along the lines you just made:
And insert into the envelope!
Now you just need to get a nice crease so that it all folds together nicely. So I just folded the envelope flap down and used a boning folder along the edge to make a crease:
Now you just take a tape roller (these things save a ton of time) and put tape on each of the edges:
Press it into the envelope flap, and viola! Once the template is finished it takes just a few minutes to make the actual liner. I traced a bunch of them at once, and then cut about 25 of them in under a half an hour.
Guest Blogger! Darci Does It Herself! Part 2
Darci, is amazing with all of her DIY projects! I love this pillow! How pretty and how easy! Her work is amazing - don't you think!
This is kind of a simple project but one of my favorites! Our wedding colors are black, white, and green so I wanted our ring bearer to carry a pillow with a little flare. After looking around at a few pre-made options and coming up empty handed, I decided to make one myself! The supplies I used are:
• Fabric (1/2 yard at most)
• Sewing thread to match fabric
• 1” satin ribbon
• Polyfill stuffing
I wanted the pillow to be about a 9 inch square, so I cut two pieces of fabric into 10 inch squares. A word to the wise – make sure that if your fabric has a pattern, it is centered on each of the squares as you’re cutting them out. I learned the hard way that you don’t want things to look off center!
So essentially, you cut out two squares, turn the fabric so that the right sides are facing each other, and sew them together. Leave about a two inch gap on one of the sides and use that to pull the fabric through so you can turn the pillow right side out. Then, stuff away! I found that a pencil worked well to push the filling into the corners but I honestly can’t tell you how much stuffing I used. I kept putting it in and then feeling the consistency until it seemed right.
Once the stuffing is complete just use a needle and some more thread to sew the gap together. Then make your ribbon as long as you want it (depending on how much length you want to hang off the pillow) and put the middle of the ribbon in the center of the pillow. Take another needle and thread and gently sew the ribbon into the middle so that it’s attached to the pillow. Then all you have to do is tie a bow!
And here is a close-up of the back, so you can see the importance of getting that pattern centered:
This is kind of a simple project but one of my favorites! Our wedding colors are black, white, and green so I wanted our ring bearer to carry a pillow with a little flare. After looking around at a few pre-made options and coming up empty handed, I decided to make one myself! The supplies I used are:
• Fabric (1/2 yard at most)
• Sewing thread to match fabric
• 1” satin ribbon
• Polyfill stuffing
I wanted the pillow to be about a 9 inch square, so I cut two pieces of fabric into 10 inch squares. A word to the wise – make sure that if your fabric has a pattern, it is centered on each of the squares as you’re cutting them out. I learned the hard way that you don’t want things to look off center!
So essentially, you cut out two squares, turn the fabric so that the right sides are facing each other, and sew them together. Leave about a two inch gap on one of the sides and use that to pull the fabric through so you can turn the pillow right side out. Then, stuff away! I found that a pencil worked well to push the filling into the corners but I honestly can’t tell you how much stuffing I used. I kept putting it in and then feeling the consistency until it seemed right.
Once the stuffing is complete just use a needle and some more thread to sew the gap together. Then make your ribbon as long as you want it (depending on how much length you want to hang off the pillow) and put the middle of the ribbon in the center of the pillow. Take another needle and thread and gently sew the ribbon into the middle so that it’s attached to the pillow. Then all you have to do is tie a bow!
And here is a close-up of the back, so you can see the importance of getting that pattern centered:
Guest Blogger! Darci Does It Herself!
Hello MasterPiece Weddings Readers! My name is Darci and I write a wedding blog called With This Ring. When Melissa asked me to write some guest posts for her blog I was happy to participate, and thought it might be best to show you some of the DIY projects I created for my own wedding. I hope they will give you some ideas and inspiration for your own day!
Last summer, I saw an article in Martha Stewart Weddings about cute ways to dress your dog for your wedding day. There is no chance that our dog, Lola, is well behaved enough to be a part of the wedding itself but we would like to get a few pictures with her beforehand. The article contained several collars and leashes made of ribbon, but I thought that the pearl collar was too cute!
To make the collar you need:
• Embroidery thread
• Large faux pearls (I used 18mm ordered on ebay)
• Sturdy needle
• Double-faced satin ribbon
I also eventually opted for a clasp because tying the thread in a not wasn't quite as sturdy as I needed it to be. Lola isn't a huge fan of the collar so I need to be sure it will stand up to her attempts at removing it!
So first, measure around the dog's neck and add about 12 inches. Then cut the thread to size:
Tie a knot in one end of the thread, thread a needle and start putting the pearls one by one. ebay for about $5).
It took exactly twenty 18mm pearls to make the right size collar for Lola. The $5 package that I bought had about 35 pearls in there, so I used a little more than half. .
Once all the pearls are on tie another knot in the opposite end and you're finished! >
Again, I eventually decided to use a clasp because just tying the string around her neck didn't work out very well. I bought a regular nylon collar for $3 and when I got home I just cut the clasps off either end and tied them to the embroidery string. 
I tied about 6-7 knots on each side and tried to get the pears as close to the clasp as possible. This did make it a little longer that it was originally, but luckily before I actually tied the claps on I tested it out. I was able to tug gently and slip one of the pearls off over the end knot to make it a little smaller. !
Once the collar is on take some satin ribbon and tie it around the clasp into a bow...I couldn't get her to sit still long enough to take a picture of that step! But here she is, in all her pearl collar glory: >
>
Admittedly, she wasn’t a huge fan of her collar in the test runs, but she did a great job the day of the wedding. Are any of you making special collars or leashes for your pet to use on your wedding day!
Last summer, I saw an article in Martha Stewart Weddings about cute ways to dress your dog for your wedding day. There is no chance that our dog, Lola, is well behaved enough to be a part of the wedding itself but we would like to get a few pictures with her beforehand. The article contained several collars and leashes made of ribbon, but I thought that the pearl collar was too cute!
To make the collar you need:
• Embroidery thread
• Large faux pearls (I used 18mm ordered on ebay)
• Sturdy needle
• Double-faced satin ribbon
I also eventually opted for a clasp because tying the thread in a not wasn't quite as sturdy as I needed it to be. Lola isn't a huge fan of the collar so I need to be sure it will stand up to her attempts at removing it!
So first, measure around the dog's neck and add about 12 inches. Then cut the thread to size:
Tie a knot in one end of the thread, thread a needle and start putting the pearls one by one. ebay for about $5).
It took exactly twenty 18mm pearls to make the right size collar for Lola. The $5 package that I bought had about 35 pearls in there, so I used a little more than half. .
Once all the pearls are on tie another knot in the opposite end and you're finished! >
Again, I eventually decided to use a clasp because just tying the string around her neck didn't work out very well. I bought a regular nylon collar for $3 and when I got home I just cut the clasps off either end and tied them to the embroidery string. I tied about 6-7 knots on each side and tried to get the pears as close to the clasp as possible. This did make it a little longer that it was originally, but luckily before I actually tied the claps on I tested it out. I was able to tug gently and slip one of the pearls off over the end knot to make it a little smaller. !Once the collar is on take some satin ribbon and tie it around the clasp into a bow...I couldn't get her to sit still long enough to take a picture of that step! But here she is, in all her pearl collar glory: >
>Admittedly, she wasn’t a huge fan of her collar in the test runs, but she did a great job the day of the wedding. Are any of you making special collars or leashes for your pet to use on your wedding day!
Subscribe to:
Comments (Atom)
